Multitest 720


Fully automatic computer-assisted mask tester with an all-automatic pneumatic mask tightener

MT 720M

Article numbers:see below

Multitest 720M with a mask ready for testing


Why use Multitest 720?

Multitest 720 allows you to carry out all the tests that need to be performed on respiratory protective masks. In combination with the MENZL Equipment Management and Testing program, the following steps are carried out fully automatically during testing:

  • The pneumatic tightener tightens the mask so as to ensure that it sits perfectly on the inflatable dummy head.
  • The necessary tests are carried out according to the requirements specified for the type of mask in question.
  • The values recorded during testing are saved and documented by means of the MENZL Equipment Management and Testing program.
  • After testing, the mask tightener releases the mask, which can then be taken off the dummy head.

The tester features an electro-pneumatic tightener for masks with five-point head harnesses. In combination with the snap-on support for two-point masks (sold separately), and if necessary docking adapters (sold separately), it is also possible to conveniently dock and test two-point (HMC) masks. Multitest 720‘s capability to operate in a fully automatic  computer assisted manner makes not only for the highest quality in terms of equipment testing but also for utmost operator-friendliness.


MT 720M Maskenspannung Multitest 720: mains switch, power-cord socket, USB port Snap-on support for two-point masks MT 720M 2Pkt
Mask tightener Mains switch, power-cord socket, USB port Snap-on support for two-point masks
(sold separately)
Dummy head with snap-on support for two-point masks and docking adapters


Scope of possible tests

  • full-face masks – leak tightness at positive/negative pressure
  • full-face masks – exhalation-valve opening pressure

Optional functionality upgrades and accessories make it possible to use the mask testers of the Multitest 720 series also for carrying out all of the static tests that need to be performed on lung-governed demand valves and chemical protective suits.

Functionality upgrades

Pressure gauge/digital pressure indicator: Multitest 720 can be upgraded with a low-pressure gauge (“M” models of the Multitest 720 series) or with a digital low-pressure indicator (“D” models of the Multitest 720 series), making it possible to operate the unit manually and perform tests without a computer.

Equipment testing at medium pressure: It is also possible to upgrade Multitest 720 with a medium-pressure transducer and medium-pressure connectors (“plus” models of the Multitest 720 series), making it possible to perform tests on  lung-governed demand valves pressurized with positive pressure. Medium-pressure tests cannot be performed manually but only by means of a computer and the MENZL Equipment Management and Testing program, with the data recorded during testing being displayed on the computer screen.

Scope of delivery 

  • tester of the Multitest 720 series
  • mask sealing plug (round thread)
  • silicone spray
  • power cord
  • MENZL Equipment Management and Testing program
  • operator’s manual


dimensions (w x h x d): 500 x 480 x 300 mm
weight: approx. 18 kg
power supply: 230 V; 50 Hz
power consumption: 100 W
low-pressure transducer: ±30 mbar (accuracy class 0.5)
low-pressure connectors: round thread (EN 148-1)
compressed-air connectors:
euro coupling

Air of the quality prescribed for testing respiratory protective equipment (EN 12021) needs to be supplied to the tester at a pressure of 5 to 10 bar.

Article numbers

Multitest 720 with electronic data recording
Multitest 720M like MT 720, + low-pressure gauge (±30 mbar1, ±1.6%) 
Multitest 720D like MT 720, + digital low-pressure indicator
Multitest 720 plus like MT 720, + equipment testing at medium pressure
Multitest 720M plus like MT 720 plus, + low-pressure gauge (±30 mbar1, ±1.6%)
Multitest 720D plus
like MT 720 plus, + digital low-pressure indicator
Snap-on support for two-point masks with Gallet system (MSA and Dräger) 330-126
Docking adapters for two-point masks (MSA Auer – Schuberth system) 330-127
Docking adapters for two-point masks (Rosenbauer – Heros) 330-128


Units for international markets; units for the Austrian market come with a ±20 mbar low-pressure gauge.

Accessories for equipment testing

Accessories for testing masks

M45x3 330-016
MSA plug-in connector 330-015
MSA plug-in connector AutoMaXX 330-150
Dräger plug-in connector 330-017
Interspiro plug-in connector 330-018
Interspiro Clic 330-131
Interspiro S class 330-494
Plug-in connector ESA 330-187
Racal plug-in connector 330-130

Accessories for testing two-point (HMC) masks

Fastening strap for testing Dräger HMC masks 330-210
Fastening strap for testing Interspiro HMC masks 330-522
HMC testing implement – SP 330-126
MSA adapter (Avon/Schuberth system) for HMC testing implement 330-127
Interspiro adapter for HMC testing implement 330-128

Other accessories

Silicon service spray for dummy head (400 ml) 330-470
Protective hood for dummy head 340-001
Cylinder pressure gauge for 200-bar and 300-bar cylinders 330-023

MENZL Equipment Management and Testing program 330-004

Barcode scanner, wired (USB) 330-154
Barcode scanner, wireless (USB) 330-221
Barcode labels, back adhesive (pack of 100) 330-219
Barcode labels, front adhesive (pack of 100) 330-220

Replacement rubber part for dummy head 310-024

Pressure gauge ±30 mbar 



Product flyer (Multitest 720M)
© Resposible for the site's content: Andreas MENZL / Fritz MENZL. Errors and omissions excepted. Subject to change without notice.