Multitest 710

 

Manually operated mask tester with a pneumatic mask tightener

  

 

 

MT 720M

Article number:330-078

 Multitest 710M with a mask mounted for testing

Why use Multitest 710?

Multitest 710 is suitable for all the static tests that need to be performed on respiratory protective masks. It features a pneumatic tightener for masks with five-point head harnesses. In combination with the snap-on support for two-point masks (sold separately), and if necessary docking adapters (sold separately), it is also possible to conveniently dock and test two-point (HMC) masks.

The pneumatic mask tightener not only makes it easy to swap masks quickly but also guarantees that they sit tightly on the dummy head. A joystick allows you to inflate and deflate the dummy head.

The negative pressure required for testing is supplied by Multitest 710’s built-in pump; the necessary positive pressure and the opening pressure for 10‑litre flow tests are produced by means of the medium pressure fed to the device. All tests can be controlled via a joystick. The current level of negative/positive pressure is shown on the tester’s low-pressure gauge.

 

MT 720M Maskenspannung MT 710 Netz MT 720M 2Pkt
Mask tightener Power connection and
mains switch
Dummy head with snap-on support for two-
point masks and docking adapters

Scope of possible tests

  • full-face masks – leak tightness
  • mask exhalation valves – opening resistance

Optional functionality upgrades and accessories make it possible to use the Multitest 710 mask tester also for carrying out all of the static tests that need to be performed on lung-governed demand valves and chemical protective suits.

Scope of delivery 

  • Multitest 710
  • mask sealing plug – round thread
  • silicone spray
  • power cord
  • operator’s manual

Specifications

dimensions (w x h x d): 500 x 480 x 300 mm
weight: approx. 18 kg
power supply: 230 V; 50 Hz
power consumption: max. 100 W
low-pressure gauge: ±30 mbar1 (accuracy class 1.6)
low-pressure connectors: round thread (EN 148-1)
compressed-air connectors:
(medium-pressure)
euro coupling

1)

Units for international markets; units for the Austrian market come with a ±20 mbar low-pressure gauge.

Air of the quality prescribed for testing respiratory protective equipment (EN 12021) needs to be supplied to the tester at a pressure of 5 to 10 bar.

Accessories for equipment testing

Accessories for testing masks

M45x3 330-016
MSA plug-in connector 330-015
MSA plug-in connector AutoMaXX 330-150
Dräger plug-in connector 330-017
Interspiro plug-in connector 330-018
Interspiro Clic 330-131
Interspiro S class 330-494
Plug-in connector ESA 330-187
Racal plug-in connector 330-130

Accessories for testing two-point (HMC) masks

Fastening strap for testing Dräger HMC masks 330-210
Fastening strap for testing Interspiro HMC masks 330-522
HMC testing implement – SP 330-126
MSA adapter (Avon/Schuberth system) for HMC testing implement 330-127
Interspiro adapter for HMC testing implement 330-128

Other accessories

Silicon service spray for dummy head (400 ml) 330-470
Protective hood for dummy head 340-001
   
Cylinder pressure gauge for 200-bar and 300-bar cylinders 330-023

MENZL Equipment Management and Testing program 330-004

Barcode scanner, wired (USB) 330-154
Barcode scanner, wireless (USB) 330-221
Barcode labels, back adhesive (pack of 100) 330-219
Barcode labels, front adhesive (pack of 100) 330-220

Replacement parts

Pressure gauge ±30 mbar 

2500-024

Downloads

Product flyer
   
© Resposible for the site's content: Andreas MENZL / Fritz MENZL. Errors and omissions excepted. Subject to change without notice.