RDT 12/15
Fully automated
cleaning
disinfecting
drying
of up to 16 respiratory protective masks
(in combination with accessories also suitable for cleaning, disinfecting and drying 16 lung-governed demand valves or 2-3 SCBAs)
|
|
Article numbers:see below
|
Why use RDT 12/15?
Respiratory protective masks get exposed to a wide range of contaminants, such as dust, perspiration, bacteria and viruses, as well as dirt of all kinds. Hence, they need to be thoroughly cleaned and disinfected.
Cleaning and disinfecting respiratory protective masks manually is a time-consuming, and not entirely hygienic, process.
The fully automatic RDT 12/15 mask washing machine is designed for the gentle, hygienic and efficient back-to-back cleaning, disinfecting and drying of up to 16 respiratory protective masks in approximately 3.5 hours. In conjuction with accessories, it is also possible to load the machine with up to 16 lung-governed demand valves (LGDV) or up to 3 SCBAs.
Its small footprint and silent operation make RDT 12/15 the ideal choice for respiratory protective equipment workshops with no dedicated wet area.
How RDT 12/15 works
RDT 12/15's drum is equipped with elastic fastening straps. As a result, virtually all makes and models of full-face masks can be put in without using any additional adapter.
During the cleaning cycle, the equipment is repeatedly pulled through the water and detergent in the machine. When the cycle is complete, the wastewater is removed via RDT 12/15's built-in pump. Subsequently, the equipment gets disinfected in the same manner with the disinfectant provided. The required amount of detergent/disinfectant can be added to the water manually using a measuring jug or by means of a fully automatic supply unit (sold separately).
During the drying cycle, heated air (max. 50 °C) flows through the rotating masks, lung-governed demand valves or SCBAs before escaping into the ambient environment via an opening in the top of RDT 12/15's housing.
Control panel
|
Back panel |
|
Drum loaded with a mask, the LGDV cleaning adapter and an SCBA |
Under-unit cabinet with adjustable feet (sold separately) |
Disinfectant and detergent tray (sold separately) |
Manual dirty/clean indicator
The machine comes with a manual dirty/clean indicator that makes it easy to quickly indicate whether the equipment in the machine is dirty or clean. The indicator is magnetic, but it can also effortlessly be installed on non-magnetic surfaces by means of the included double-sided adhesive pads.
Accessory: LGDV cleaning adapter
LGDV cleaning adapter | LGDV ready for processing | Flexible elastic straps hold the LGDVs firmly in place |
Accessory: SCBA cleaning kit
This upgrade makes it possible to process up to three SCBA carrier-and-harness assemblies using RDT 12/15. It includes the bungee cords for properly fastening the assemblies to the drum of RDT 12/15 (see images) as well as the required modifications of the machine in terms of both hardware and software.
If the units are installed in the machine with their pressure reducers attached, they have to be pressurized by means of miniature compressed-air cylinders (0.33 l), which are sold separately upon request.
Scope of delivery
- RDT 12/15 mask washing machine
- power cord
- water supply hose (2 m incl. 2 x washer)
- wastewater hose (2 m incl. 2 x hose clamp)
- 2 x bungee cord for securing mask straps
- manual dirty/clean indicator (incl. double-sided adhesive pads)
- accessories (vary depending on your order)
- operator’s manual
Items included if the machine comes with an LGDV cleaning adapter:
- medium-pressure hose for LGDV cleaning adapter (1.5 m)
- silicone spray grease for regreasing the couplings of the LGDV cleaning adapter
- baskets for holding small parts
Specifications
water section: | stainless steel |
base: | texture-painted aluminium |
dimensions (w x d x h): | 900 x 650 x 1090 mm |
capacity: | without accessories: up to 16 masks (depending on the type of mask) with accessories: up to 16 lung-governed demand valves and 2 to 3 SCBAs |
weight: | approx. 100 kg |
power supply: | 220 Volt, 50 Hz |
power consumption: | max. 1550 W |
water connection: | 3/4" cold water |
wastewater connection: | wastewater hose, 20 mm inside diameter |
Article numbers
Mask washing machine RDT 12/15 | 330-348 |
Under-unit cabinet with height-adjustable feet (height approx. 730 mm) |
330-857 |
Disinfectant and detergent tray | 330-468 |
Fully automatic disinfectant supply unit | 330-442 |
Fully automatic detergent supply unit | 330-551 |
LGDV cleaning adapter for RDT 12/15 (up to 16 LGDVs) | 330-910 |
SCBA cleaning kit for RDT 12/15 (up to 3 SCBAs) | 330-736 |
Dehumidifier | on request |
Maintenance and care
Stainless-steel cleaner (500 ml) | 330-544 |
Metal restorer (400 g) | 330-554 |
Water softener | 330-746 |
Disinfectant EW80 des 1 l (1% concentration level, effective against TB, 30 min) | 330-417 |
Disinfectant EW80 des 5 l (1% concentration level, effective against TB, 30 min) |
330-418 |
Detergent EW80 clean, low-foam formulation, 5-litre can | 330-450 |
Silicone spray grease for regreasing the couplings of the LGDV cleaning adapter | 190-002 |
Downloads
Product flyer (RDT 12/15) |
Product flyer (LGDV cleaning adapter) |