.png)
Multitest MDS
Automated computer-controlled tester for performing tests on medium-pressure hoses
Why use Multitest MDS?
Featuring a minimum of controls, Multitest MDS allows you to conveniently and efficiently carry out all of the tests that need to be performed on medium-pressure hoses.
The Equipment Management program, which is included in the scope of delivery, not only controls the execution of the automated test procedures but also records and documents data in an accurate and tamper-proof manner, making Multitest MDS a particularly user-friendly tester that stands out for the quality it offers in terms of equipment testing and data documentation.
Possible tests
- leak test at 150 mbar
- leak test at 8 bar
- flow-rate test up to 500 l/min
Scope of delivery
- Multitest MDS
- Equipment Management program (v. 5, excl. cylinder-filling functionality)
- power cord
- USB cable
- operator’s manual
The computer system is NOT included in the scope of delivery. You can either order it from us or provide one that meets the system requirements stated by us.
Specifications
| dimensions (w × d × h): | 420 × 360 × 225 mm |
| housing: | texture-painted aluminium |
| weight: | approx. 10 kg |
| power supply: | 230 V, 50 Hz |
| power consumption: | max. 100 W |
| testable hose length: | max. 50 m |
| pressure tansducer: | 0 – 250 mbar |
| pressure transducer: | 0 – 16 bar |
| flow-rate sensor: | 0 – 500 l/min |
| pressure pump: | max. 250 mbar |
| pressure reducer (2 x): | 0 – 10 bar |
A 10-bar pressure supply with an air output of at least 500 l/min is required for operating the tester.
Optional extra
Insulation tester (50 – 1,000 V)
Dimensions (l × w × h): 59 × 103 × 225 mm
The probes need to be clamped to the coupling and the nipple. Once the measurement is complete, the display reading must be taken and entered into the Equipment Management program, which subsequently auto-evaluates the input.
Article numbers
| Multitest MDS | 330-647 |
| Insulation tester (50 – 1,000 V) | 120-045 |